![]() There should be sufficient tension on the quick-release to keep the riser firmly in place when you pull it back to the riding position. ![]() The Flip-It folds forward, away from the seat, letting you mount the bike easily. You may also install it on the Phoenix 700. PHOENIX BIKES tandems feature the Flip-It riser. The handlebar should not crowd your face, chest or knees. The handlebar should be roughly chest high. You should be able to sit back comfortably in the seat, resting hands on the handlebar grips with elbows gently bent. Using a hex wrench, loosen the clamps, adjust and retighten. Height and bar position are adjustable throughout a three-inch range at both ends of the riser. There are different designs of handlebars and risers used on PHOENIX BIKES. Minor adjustments are made by pulling the pins from the sprint brace tubes and tilting the seat to the position you want. After gaining riding experience, you may want to try a more reclined position. This position, which represents the bottom power of your stroke, your knee should be slightly bent.Īt first you may prefer your seat upright. Now, with the brakes still applied and sitting back in the seat, place the ball of your foot on the pedal, extend your leg fully and apply pressure. The top adjustment of the clamp should be set to allow the seat to slip over the shoulder bolts but not move side to side. Both oval and v-clamps can be adjusted for more clamping pressure by tightening the QR. If the sprint brace tube pins have been removed, When the seat is positioned as desired, clamp with the QR handle. ![]() For seat back tilt adjustments, pull the pinsįrom the sprint brace tubes. ![]() The oval or v-clamp seat clamp system will release enough to slide with deployment of the QR handle. If your knee is bent, move the seat as required to bring your heel to the pedal with your leg held straight. Sitting with your back against the seat and your leg fully extended, your heel should rest squarely on the pedal. Lift your foot and rotate the pedal counter-clockwise to the extended position. REMEMBER: IF YOU LET UP ON THE BRAKE, THE BIKE MAY ROLL. On the Screamer captains position, take hold of the seat back with one hand, hold the handlebar grip with the other, fold the riser forward, step over the frame and seat yourself. On long-wheelbase models, just step over the frame and seat yourself. To find the right seat position, mount the bike. Finding your best riding position is easier when you begin with a good fundamental riding posture. PHOENIX BIKE WRX bikes are designed to fit all sizes of riders, and to accommodate them with a range of comfort options. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. Archives
January 2023
Categories |